What You Need to Know About Pipeline Engineering


In order to transport gas and oil products, a system needs to be created and to do that, a pipeline engineer is required. On the whole, when it comes to planning, pipeline engineers are mainly involved in the planning procedure.

The common responsibilities of pipeline engineers include:

  • Determining technical specifications, such as size and position of the pipe
  • Determining pipelines routes

Pipeline engineers carry out a vital job in the process of planning and deciding on the locations, stations intended for upkeep, and different fittings of equipment that help in the project. They are additionally liable for dealing with environmental matters and regulatory restrictions that impact the pipelines in any manner.

You must be aware of the fact that industries related to oil, as well as natural gas, heavily rely upon these pipelines to remain in business. By having inappropriately built pipelines, the transfer of these materials could turn out to be terrible. The requirement is essentially excessively extraordinary.

Also Read: Beef Broth

A considerable number of individual pipes are being utilized, and the numbers are anticipated to grow later on. It appears to be a ton of work; however, it is totally expected to keep business running, homes warm, and vehicles on the road. Therefore, in this case, it is expected that more pipeline engineering services will be required to deal with new development and upkeep in the future.

Kinds of Pipeline Each Oil and Gas Engineer Should Be Aware Of

Gathering Pipelines

Pipelines in this category are utilized to transport the products related to oil or gas from the source to handling/processing plants or storage tanks. In most cases, these are stuffed by ‘Flowlines,’ respectively attached to separate wells in the ground. Moreover, subsea pipes utilized for gathering products from deepwater production points are counted in this sort.

Transmission Pipelines

Pipelines in this category are utilized to deliver NGLs, crude oil, natural gas, and refined items for faraway distances crossways states, countries, and continents.

Pipelines in this category are utilized to deliver the stuff from the production facilities to distribution facilities. These pipelines are capable of working at high pressures, falling in the range of 200 – 1,200 psi, with every transmission line making use of station stations (intended for gas lines) and pump stations (designed for crude oil and liquid stuff).

Distribution Pipelines

Pipelines in this category are a framework based on ‘mains’ and ‘service’ lines, utilized by distribution organizations. They transport natural gas to the areas of homes and organizations.


Pipelines in this category are connected to an individual wellhead in a vigorously producing oilfield. The reason behind it is to deliver the raw items from the wellhead to the gathering lines. The staff, in this case, includes, blend of oil, gas, water, and sand and is commonly close to 12″ diameter in size.

Feeder Pipelines

Pipelines in this category are utilized to transfer the items from processing and storage facilities to the faraway locations. The items, in this case, could include crude oil, gas, or gas liquids. In most cases, feeder lines are somewhere in the range of 6 – 12″ diameter.

How to Become A Pipeline Engineer?

In case you’re considering becoming a pipeline engineer, following are the things you can hope to be accountable for:

  • Keep an eye on the quality check of current pipes
  • Supervising the development of new pipelines
  • Creating pipeline routes in all terrains
  • Designing physical pipelines
  • Repair & upkeep

Steps to Become A Pipeline Engineer

Get a Bachelor’s Degree in Engineering

In order to become a pipeline engineer, the individual needs to earn a bachelor’s degree. In most cases, when it comes to deciding on major, mechanical, or civil engineering is preferred. Moreover, the employer’s requirement can be met through:

  • Petroleum
  • Chemical
  • Electrical

And some different sorts of engineering may likewise meet the prerequisites. The engineer who likes to seek licensure is required to appear in engineering programs that are approved by ABET. In general, a bachelor’s in engineering requires to complete four years program.

Start the Licensure Procedure

In order to begin with the procedure of engineering licensure, the method involves the section of the preliminary Fundamentals of Engineering (FE) exam; this can be followed after finishing an educational program at a board-approved school. The graduate gets the title of engineer intern or engineer in training after going through the FE exam.

Acquire Work Experience

Engineer Intern or Engineer in Training proceeds to acquire four years of entry-level work experience after going through the FE exam. This involves working under the supervision of an approved, experienced engineer. When it comes to taking care of these positions, most engineering degree programs and professional organizations frequently help graduates.

Go Through the Standards and Practice of Engineering Exam

Engineer Intern or Engineer in Training are able to apply to their state licensing board to take part in the Principles and Practice of Engineering (PE) exam, which is supervised by state licensing boards. However, in this case, each state has particular prerequisites; the PE exam is generally the last phase to licensure. States possibly will acknowledge engineering licenses from different states, expecting the necessities are at any rate as strict as their own.

Get Certified

Pipeline engineers can progressively get an attractive edge to likely employers and move toward professional success due to certain certifications. In this case, for instance, the Transportation Security Administration offers the Transportation Worker Identification Credential (TWIC).

Also Read: Keto Guide